由于濟南鋁板的保存環境、溫度和濕度都比較適合霉菌生長所以,當鋁板表面混有一定的物質時,就會自動向空氣中吸收水分形成一種原電池腐蝕反應.有什么辦法可以有效預防鋁板的霉變現象呢?
Because aluminum Jinan save the environment, temperature and humidity are more suitable for mold growth so that, when mixed with the aluminum surface of a certain material, it will automatically form a galvanic corrosion reaction absorb moisture into the air. Is there any way you can effectively prevent aluminum the moldy phenomenon?

1.不能使用含鈉鹽或鎂鹽的精煉變質打渣劑,最好是采用NaF成分的精煉變質劑,或N2氣精煉.
1. You can not use sodium or magnesium-containing metamorphic fight slag refining agent, preferably using NaF ingredients refining modifier, or N2 gas refining.

2.不能使用含植物纖維的脫模劑和含植物纖維機加工切削液,最好換成油基防銹切削液.
2. You can not use a release agent containing plant fiber-containing plant fiber machining cutting fluid, is best replaced oil-based rust-proof cutting fluid.

3.鋁板不能長期暴露在太陽底下,否則容易造成紡織產品表面飛塵堆積.
3. Long-term exposure to aluminum can not be in the sun, or likely to cause surface textile products fly ash accumulation.

4.放置在鋁板上的產品包裝紙箱一定要用纏繞膜包裹好,如果產品沾水,一定要及時放在通風處吹干.
4. Place the aluminum product packaging cartons must use stretch film wrapped, if the product is wet, must be timely ventilated place to dry.

經實踐證明,以上方法確實可以有效預防鋁板霉變,大家不妨試試吧!當然您有好的方法可以跟我們分享!